#SRI-8680-0073

  • Draw air samples through traps or load the loop of a gas sampling valve
  • Enables Data System Control of an external vacuum pump (included)
  • Extremely Reproducible Flow through traps

HOT TIP:

Up to five injectors can be mounted on the 8610C GC Mainframe. Due to limited space, only a single injector can be mounted on the 310 GC Mainframe.

$619.00

SRI GC ACCESSORIES - VACUUM PUMP INTERFACE

The vacuum pump interface consists of a power outlet (110 or 220 VAC ) on the side of the 8610C or 310 GC into which the external vacuum pump is plugged.

The PeakSimple data system can turn the power to this receptacle on/off thus controlling the vacuum pump. Typically the vacuum pump is used to draw gaseous samples through the traps for ambient air monitoring applications, or to load the loop of a gas sampling valve by pulling sample gas from a remote location. Because the vacuum pump can be turned on for a precise length of time, the gas flow through the traps is very reproducible (approx. 100ml/min ).

HOT TIP:

The interface can be used for other electrical accessories that can be controlled by peaksimple as "timed events"..

More Information
Selections Accessories
Details VACUUM PUMP AND PUMP INTERFACE
Selections Accessories
Quadrex © 2021. All Rights Reserved

Secure Payments Method payment methods