#SRI-8610-5405-1, #SRI-8610-5405-2

SRI PRECONFIGURED GC SYSTEMS - NARROW-BORE CAPILLARY FID GC

  • FID Detector
  • Built-in air compressor
  • On-Column PTV injector
  • 1-Channel Peaksimple data System
  • 30 Meter 0.25mm capillary column

The Narrow Bore Capillary FID GC System includes everything you need for ultra high performance narrow bore capillary chromatography. In addition to a wide range of general gas chromatography applications, the Narrow Bore Capillary FID GC System is excellent for environmental testing and quality control applications.

The On-Column Programmable Temperature Vaporization (OCPTV) injector allows larger and simpler liquid injections than are otherwise possible with narrow bore columns. Like a traditional heated Split/Splitless injector, the OCPTV has a spilt vent and needle valve for venting solvent while concentrating sample. Unlike a heated Split/Splitless injector, the OCPTV vents the solvent without rapid vaporization. Carrier gas flow is programmable via the PeakSimple data system.

Options & Upgrades: additional detectors with 4 channel serial or 6 channel USB PeakSimple data system, Split/Splitless and PTV injectors, Methanizer, gas sampling valves, columns

$10,289.00

SRI PRECONFIGURED GCs

SRI full-featured Portable GCs are ideal for use in the field, as well, and they are equally comfortable on a lab bench. You can customize a GC system to meet your specific analytical needs with a wide range of injectors, detectors, and accessory options.

Due to the popularity of some configurations, a number of pre-configured GCs are offered satisfying a wide range of common analytical applications. In some cases, the preconfigured GCs are less expensive than the identical hardware assembled "a la carte." Each of the preconfigured GCs may be further customized (except the educational GC systems).

Check out these popular pre-configured systems below, or configure your own system to meet your needs.

Hot tips:

Up to five injectors can be mounted on the 8610c GC Mainframe. Due to limited space, only a single injector can be mounted on the 310 GC Mainframe.

In order to add a second injector, of any type, additional cold on-column injector hardware must be added first. This hardware is then upgraded to the appropriate injector type.

Preconfigured gcs take advantage of batch manufacturing, offering a lot of gc power at very reasonable pricing.

Selections Preconfigured systems
Volts 110V
Quadrex © 2021. All Rights Reserved

Secure Payments Method payment methods