HP-GF-25
Short-Style Graphite Ferrules For Agilent Gcs
Agilent's standard injector and detector fittings are such that they require a shortened ferrule design. The graphite ferrules below are specifically for Agilent GCs.
Quadrex offers a complete range of graphite and graphite/TL-Polyimide™ ferrules for capillary column installation which offer a reliable gas tight seal and are specifically designed for use in your GC. When choosing the ferrules you need, remember that there really isn't a "standard" ferrule or GC fitting. Most instrument manufacturers and ferrule suppliers have their own particular designs and dimensions for these components, so be sure you're selecting the ferrules which were designed for your particular GC. This will insure that your column installation will be leak-free.
Hot tip:
Hard yet pliable, graphite-vespel ferrules can be re-used up to 6 or more times before requiring replacement.Over tightening any ferrule would cause deformity and shorten the ferrule lifetime.
Column I.D. (mm) | 0.25mm |
---|---|
Column O.D. (MM) | 0.35mm |
Ferrule dimension | (Agilent) 1/16” x 0.4mm ID |